2011 G37S coupe complete lighting upgrade (pics inside)
#42
I just got the same car today.. MLW g37xS.. The fogs on the bottem I would liek to change..
-5000k H11 slim ballast HID drop in kit (set)
V-HID 35W SLIM BALLAST XENON HEADLIGHT KIT H11
Was that kit easy to install? Anything major? You changed you HID headlights low/high beams? if you didnt would the stock headlights match the H11 kit at 5000k?
Thanks
-5000k H11 slim ballast HID drop in kit (set)
V-HID 35W SLIM BALLAST XENON HEADLIGHT KIT H11
Was that kit easy to install? Anything major? You changed you HID headlights low/high beams? if you didnt would the stock headlights match the H11 kit at 5000k?
Thanks
#43
I just got the same car today.. MLW g37xS.. The fogs on the bottem I would liek to change..
-5000k H11 slim ballast HID drop in kit (set)
V-HID 35W SLIM BALLAST XENON HEADLIGHT KIT H11
Was that kit easy to install? Anything major? You changed you HID headlights low/high beams? if you didnt would the stock headlights match the H11 kit at 5000k?
Thanks
-5000k H11 slim ballast HID drop in kit (set)
V-HID 35W SLIM BALLAST XENON HEADLIGHT KIT H11
Was that kit easy to install? Anything major? You changed you HID headlights low/high beams? if you didnt would the stock headlights match the H11 kit at 5000k?
Thanks
easy install for fogs, once you remove the fender liners, its all clear view of the fog light housing. very very easy.
regarding the low/high beams, i changed the bulbs to get a dead on exact color match with the fogs.
the oem low/high beam HID bulbs are a lower temp bulb, im thinking 4300k as opposed to 5000k so it emits a slightly different more yellow color.
#45
Nice work bro, it looks amazing!
Where exactly did you mount the ballasts? Is it safe to mount HIDs in such a small fog housing? Overheating? Housing melting?
Also, how did you seal it so moisture does not get into the housing?
Regards,
Tony
Where exactly did you mount the ballasts? Is it safe to mount HIDs in such a small fog housing? Overheating? Housing melting?
Also, how did you seal it so moisture does not get into the housing?
Regards,
Tony
easy install for fogs, once you remove the fender liners, its all clear view of the fog light housing. very very easy.
regarding the low/high beams, i changed the bulbs to get a dead on exact color match with the fogs.
the oem low/high beam HID bulbs are a lower temp bulb, im thinking 4300k as opposed to 5000k so it emits a slightly different more yellow color.
regarding the low/high beams, i changed the bulbs to get a dead on exact color match with the fogs.
the oem low/high beam HID bulbs are a lower temp bulb, im thinking 4300k as opposed to 5000k so it emits a slightly different more yellow color.
Last edited by tony_m_777; 04-02-2011 at 02:29 AM.