INFINITI G37 LED SIDE MIRROR COVER? Should I try it?
#94
Premier Member
I got it painted along with my front grill and my steering wheel trim bezel.
For my front wheels I did put 20mm spacers.
Here is the video I uploaded it's already dark when I recorded it.
09 g37 side mirror - YouTube
For my front wheels I did put 20mm spacers.
Here is the video I uploaded it's already dark when I recorded it.
09 g37 side mirror - YouTube
#96
Registered Member
desir-de-vivre | Rakuten Global Market: NISSAN Nissan SKYLINE Skyline Nissan genuine Stai Risch sideview mirror blinker
Just if anyone is interested in the OEM Skylines LED sidemarkers for the Sedan.
Just if anyone is interested in the OEM Skylines LED sidemarkers for the Sedan.
#98
Registered Member
iTrader: (3)
Taking the covers off is not easy. I had to swap mine out when I replaced my mirrors for the power folding ones from the 'vert. You do not have to remove the entire assembly. You can either remove the mirror glass itself and release the clips on each side or you can try a thin blade flag screwdriver and lightly pry it off the housing. It is not a piece of cake by any means. Hope this helps.
#99
Registered Member
iTrader: (3)
Does anybody have access to Nissan FAST or any parts catalogs for the Nissan JDM Skyline Coupe or maybe point me in the direction of someone who can help? I am trying to find part numbers for this EXACT mirror cover and chrome LED lamp assembly for both right and left sides:
Attachment 105765
I don't care about color as the covers would have to be repainted to match my color code.
This is offered as a factory upgrade on the JDM Skyline Coupe from Nissan and I can't find the right part numbers anywhere. Any help is greatly appreciated.
Attachment 105765
I don't care about color as the covers would have to be repainted to match my color code.
This is offered as a factory upgrade on the JDM Skyline Coupe from Nissan and I can't find the right part numbers anywhere. Any help is greatly appreciated.
Last edited by ILM-NC G37S; 05-15-2015 at 11:17 AM.
The following users liked this post:
flipmode007 (07-19-2014)
#102
Premier Member
#104
Registered Member
iTrader: (3)
Looks like a good product and paint job. Hope it works out for you. I'm still trying to source the OEM kit from Japan.
I don't think the wiring will be too bad. It will be tricky getting the wires through the mirror. The hardest part will be getting the pins (if you're wiring through the door/body harness) to connect the wires to the BCM. That's the problem I'm facing now with the power fold. Drivers side works great but I can't make the crossover harness to the passenger side as the pins are on back order through August!
Good luck with your set. Please keep us updated!
I don't think the wiring will be too bad. It will be tricky getting the wires through the mirror. The hardest part will be getting the pins (if you're wiring through the door/body harness) to connect the wires to the BCM. That's the problem I'm facing now with the power fold. Drivers side works great but I can't make the crossover harness to the passenger side as the pins are on back order through August!
Good luck with your set. Please keep us updated!
Last edited by ILM-NC G37S; 07-31-2014 at 08:23 AM.