Interior LEDS installed
08-06-2010, 04:28 AM
#1
Registered User
Thread Starter
Join Date: May 2010
Location: West Covina, CA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Interior LEDS installed
Just installed LEDS on the interior. i've had my led license plate lights for a month now.
before:
after:
also changed the bulbs on my fogs
before:
after:
also changed the bulbs on my fogs
08-06-2010, 08:40 AM
#2
Registered User
Join Date: Jul 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
and HOW! I havent looked at the doors, but the map lights (those are on roof, up by sunglass holder right?) I have no idea and am afraid to try just prying the covers off?
I will
you for an explanation 
I will
you for an explanation
08-06-2010, 10:26 AM
#6
Registered User
LEDs are the first mod everyone should do......its so cheap and easy but makes a BIG DIFFERENCE!!
the bulb sizes are w-194's, the map lights are different, i forgot which ones i used...........you can get them at superbrightleds.com
replacing the bulbs is easy...takes no more than 5 minutes. Just slide a flathead screwdriver into the space and pop out the plastic piece that covers the light. you can be forceful on it, it wont break
im not too crazy about the valence overlay.....it makes the rear bumper look like it end short and leaves the exhaust hanging in the middle of the air
the bulb sizes are w-194's, the map lights are different, i forgot which ones i used...........you can get them at superbrightleds.com
replacing the bulbs is easy...takes no more than 5 minutes. Just slide a flathead screwdriver into the space and pop out the plastic piece that covers the light. you can be forceful on it, it wont break
im not too crazy about the valence overlay.....it makes the rear bumper look like it end short and leaves the exhaust hanging in the middle of the air
Trending Topics
08-06-2010, 12:48 PM
#10
Registered User
Join Date: Aug 2010
Location: Hartford, CT
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
are the LED's too bright inside the car? Seems like they would be at night...
Anyone know what size the bulbs are for the fog lights, I want to try and find High Density xenon headlights for the foggers. Kind of afraid to install them myself, any one done this?
Anyone know what size the bulbs are for the fog lights, I want to try and find High Density xenon headlights for the foggers. Kind of afraid to install them myself, any one done this?
08-06-2010, 11:08 PM
#12
Registered User
Thread Starter
Join Date: May 2010
Location: West Covina, CA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
here's what i got.
WLED-x5 - (4)
921-x12 - (2) maplights i got 12 led so its brighter.
i got them from superbrightleds.com
thanks!
LEDs are the first mod everyone should do......its so cheap and easy but makes a BIG DIFFERENCE!!
the bulb sizes are w-194's, the map lights are different, i forgot which ones i used...........you can get them at superbrightleds.com
replacing the bulbs is easy...takes no more than 5 minutes. Just slide a flathead screwdriver into the space and pop out the plastic piece that covers the light. you can be forceful on it, it wont break
im not too crazy about the valence overlay.....it makes the rear bumper look like it end short and leaves the exhaust hanging in the middle of the air
the bulb sizes are w-194's, the map lights are different, i forgot which ones i used...........you can get them at superbrightleds.com
replacing the bulbs is easy...takes no more than 5 minutes. Just slide a flathead screwdriver into the space and pop out the plastic piece that covers the light. you can be forceful on it, it wont break
im not too crazy about the valence overlay.....it makes the rear bumper look like it end short and leaves the exhaust hanging in the middle of the air
the valence is a 50/50 i can take it off anytime i want.
08-07-2010, 01:57 PM
#14
Registered User
Thread Starter
Join Date: May 2010
Location: West Covina, CA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts