Ambient Light Removal
#1
Ambient Light Removal
Personally, I like very little light while driving...feels more intimate. I've never liked the ambient light and would always put my finger over it to see how it would look without it...and I always liked the darker look.
This def. isn't for everyone but if you don't like it either then, here you go!
1) take off the map light covers (use the electrical tape on the flathead screwdriver thing to avoid scratches)
2) unclip those tabs and the whole assembly will pop out
3)There is the light...It doesnt hang out like that when you first see it. it's actually clipped onto the assembly but removing is super easy with a flat head. You need to unclip the black end of the light assembly on the sides and the back (it's tricky..be creative)
4) There is the light. You can pull it out really easily
5) No more light!
6) clip and snap everything back together and enjoy the darkness.
Note: if you want to reinstall the bulb (or change the color) it doesnt snap back into place like most bulbs. you need to put it against the brackets then lightly press with a flat head screwdriver or other similar tool into the brackets to get the prongs stuck.
Anybody know what kind of LED this is? I will probably never reinstall this or change the color but I can see how some people would like this in another color. This is what the bulb looks like...
This def. isn't for everyone but if you don't like it either then, here you go!
1) take off the map light covers (use the electrical tape on the flathead screwdriver thing to avoid scratches)
2) unclip those tabs and the whole assembly will pop out
3)There is the light...It doesnt hang out like that when you first see it. it's actually clipped onto the assembly but removing is super easy with a flat head. You need to unclip the black end of the light assembly on the sides and the back (it's tricky..be creative)
4) There is the light. You can pull it out really easily
5) No more light!
6) clip and snap everything back together and enjoy the darkness.
Note: if you want to reinstall the bulb (or change the color) it doesnt snap back into place like most bulbs. you need to put it against the brackets then lightly press with a flat head screwdriver or other similar tool into the brackets to get the prongs stuck.
Anybody know what kind of LED this is? I will probably never reinstall this or change the color but I can see how some people would like this in another color. This is what the bulb looks like...
#6
Registered User
Good write up ... I like the light myself.
Trending Topics
#11
found a site that sells the LED in different colors: Kingbright USA, an opto-electronic LED manufacturer products include all type of LED LAMPS , SMT LED, SMD LED, LED DISPLAYS optoelectronic components
some of you might want to try this.
some of you might want to try this.
Thread
Thread Starter
Forum
Replies
Last Post
Upscale Speed
Private Classifieds
18
10-09-2015 01:42 PM