Just did LED Upgrade-What I Used (FYI)
#1
Registered User
Thread Starter
Just did LED Upgrade-What I Used; PIC's Added
First I decided to go with as many 5000k temperature bulbs as possible. The reason being that sometimes 6000k bulbs might have a tint of blue, which I didn’t want. I wanted as white as possible.
Before I get flamed I know 6500k is daylight. I know about Kelvin and CRI from bias lighting ….
Vanity Lights:
Bought them from Autolumination …. They are just about the only ones with the correct size (31mm). Scroll down on this page until you see “Vanity Mini 3 Led SMT Festoon” (or search that page)
Festoon Dome Lights
Dome (aka map), Door & License Plate Lights:
Got these from V-LED’s ..very impressed with them, quality bulbs and offered a 5000k bulb. Some people have gone with 12LED bulbs for their maps but frankly I think these 5 LED’s are plenty bright enough.
2 HID 5K WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821
Trunk Lights:
First I tried a 9 LED bulb but it wasn’t very bright, then I went with a 18 LED 921 bulb and it’s great, can’t close the little plastic dome over the light bulb but no biggie, you can’t see it anyhow. It’s the first bulb on this page.
906 921 Interior Lights
Back Up Lights:
I ordered these for the back-up lights but waiting for the weather to warm up to install, don’t want any clips to break.
V-LEDS HID WHITE 19 M-SMT 8W HIGH POWER BULBS 917 918 920 921 922 923
Parking (aka City) Lights:
Just order these LED’s (haven’t gotten yet). Wanted to whiten up the front lights to match the headlights (leaving those alone). I order these since they are bright and have a heat sync. LED’s can be heat sensitive so since they are in the headlight/fog housing (sort of) I decided on them. I won’t install these for a while.
iJDMTOY JDM Xenon White/Ultra Blue 2W High Power T10 LED bulbs for parking city lights, side door lights, license plate lights, etc
If the LED’s don’t work out, I’ll go with PIAA bulbs:
PIAA X-treme White Wedge Bulb
Fog Lights:
Ordered these but have not got them yet and won’t install for a while.
White H1 Headlight Bulb 4500K Polarg Alpha White Series
For everything I have replace already (trunk, door, vanity, map, license, glove box and back-up) it’s very easy and the forums are full of DIY to follow. I have to agree with everyone that’s done this …. Looks pretty good, cheap mod.
Update: I added a little bit better quality pics plus the back-up lights (which are great). I added the following LED for the glove box light but I could not get enough light to take a picture, but the LED is much brighter than the stock bulb.
Glove Box LED
I also added the OEM ambient lighting kit and again, that was too dim to get a decent picture but it looks great! Overpriced but it really does add a nice effect. Fogs and Parking are the only ones left, as soon as I can get my fat fingers in there.
Before I get flamed I know 6500k is daylight. I know about Kelvin and CRI from bias lighting ….
Vanity Lights:
Bought them from Autolumination …. They are just about the only ones with the correct size (31mm). Scroll down on this page until you see “Vanity Mini 3 Led SMT Festoon” (or search that page)
Festoon Dome Lights
Dome (aka map), Door & License Plate Lights:
Got these from V-LED’s ..very impressed with them, quality bulbs and offered a 5000k bulb. Some people have gone with 12LED bulbs for their maps but frankly I think these 5 LED’s are plenty bright enough.
2 HID 5K WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821
Trunk Lights:
First I tried a 9 LED bulb but it wasn’t very bright, then I went with a 18 LED 921 bulb and it’s great, can’t close the little plastic dome over the light bulb but no biggie, you can’t see it anyhow. It’s the first bulb on this page.
906 921 Interior Lights
Back Up Lights:
I ordered these for the back-up lights but waiting for the weather to warm up to install, don’t want any clips to break.
V-LEDS HID WHITE 19 M-SMT 8W HIGH POWER BULBS 917 918 920 921 922 923
Parking (aka City) Lights:
Just order these LED’s (haven’t gotten yet). Wanted to whiten up the front lights to match the headlights (leaving those alone). I order these since they are bright and have a heat sync. LED’s can be heat sensitive so since they are in the headlight/fog housing (sort of) I decided on them. I won’t install these for a while.
iJDMTOY JDM Xenon White/Ultra Blue 2W High Power T10 LED bulbs for parking city lights, side door lights, license plate lights, etc
If the LED’s don’t work out, I’ll go with PIAA bulbs:
PIAA X-treme White Wedge Bulb
Fog Lights:
Ordered these but have not got them yet and won’t install for a while.
White H1 Headlight Bulb 4500K Polarg Alpha White Series
For everything I have replace already (trunk, door, vanity, map, license, glove box and back-up) it’s very easy and the forums are full of DIY to follow. I have to agree with everyone that’s done this …. Looks pretty good, cheap mod.
Update: I added a little bit better quality pics plus the back-up lights (which are great). I added the following LED for the glove box light but I could not get enough light to take a picture, but the LED is much brighter than the stock bulb.
Glove Box LED
I also added the OEM ambient lighting kit and again, that was too dim to get a decent picture but it looks great! Overpriced but it really does add a nice effect. Fogs and Parking are the only ones left, as soon as I can get my fat fingers in there.
Last edited by 2008G-Man; 03-27-2010 at 11:10 AM. Reason: Updated PIC's
#4
Registered User
Thread Starter
I'll take some pic's this weekend. I don't have the back-up camera and I haven't done the back-up lights yet.
Trunk = $12
Door, Map & License = $30
Vanity = $8
Back-Up = $60
Front Parking/City = $20 (haven't installed yet)
Fogs = $47 (haven't installed yet)
-----------------------------------
$177 Total (not including shipping)
Trunk = $12
Door, Map & License = $30
Vanity = $8
Back-Up = $60
Front Parking/City = $20 (haven't installed yet)
Fogs = $47 (haven't installed yet)
-----------------------------------
$177 Total (not including shipping)
#7
Registered Member
iTrader: (4)
I bought the Non hi-power version of those VLED back up lights a while back.
They significantly dimished light output so they are sitting in my glove box right now. Good thing you went with the Hi-Power back up lights, hopefully they are a lot brighter than the ones I got.
They significantly dimished light output so they are sitting in my glove box right now. Good thing you went with the Hi-Power back up lights, hopefully they are a lot brighter than the ones I got.
Trending Topics
#8
Registered User
Thread Starter
I bought the Non hi-power version of those VLED back up lights a while back.
They significantly dimished light output so they are sitting in my glove box right now. Good thing you went with the Hi-Power back up lights, hopefully they are a lot brighter than the ones I got.
They significantly dimished light output so they are sitting in my glove box right now. Good thing you went with the Hi-Power back up lights, hopefully they are a lot brighter than the ones I got.
#9
Registered User
Thread Starter
I promised pics but I was laid up for almost a week with a bad back. I have pics now but for my access level it looks like I can only reference them via a URL. Is there a way to attach them directly?
#11
Registered User
Thread Starter
Thanks ...got them added!
#14
Registered User
Thread Starter
Like I mentioned .... the pics don't do them justice, They are very bright, brighter than the stock bulbs.