Email from Status Elite after shipping back CF rear diffuser, BS!
#136
Registered User
iTrader: (3)
well one its a civic not an S2000. which typically Civics get stolen becuase there are more around and are easier to steal then the S2k. people dont take S2k's to strip. they just slash the top and steal your interior bits to put in said civics. also its much easier to steal civic parts and flip them. its a lot harder to find someone to buy a stolen Mugen front bumper for an S2000 one because there are so little of them and are easy to track down because each piece is numbered. secondly the S2k community is a tight group which makes selling stolen parts much much harder. plus my car always sat in my garage. wayyyy to much money in that car to sit outside.
#137
I am pretty sure SE couldnt even sell their shitty 'limited edition' intakes. They were claiming something ridiculous 25hp gains. (If you were lucky enough to even have it fit.)
Pretty sure Dr Jones intake also went though 3 levels of quality inspection before it was sent to. Ha ha
Pretty sure Dr Jones intake also went though 3 levels of quality inspection before it was sent to. Ha ha
#138
This is from SE website
I am pretty sure poor fitment qualifies as defective product.
If the products are determined to be defective, Status Elite will make the exchange at no cost.
#139
Florida G Club
iTrader: (7)
Let me say that I am not taking a side in this just stating some facts.
My diffuser has about 95% perfect fitment. Just the very underside of it did not sit totally flush but I think that is because I was impatient and could have got it perfect and you cant see it unless you are under my car. As for the adhesive, it is VERY strong. I have used lots of product with 3M tape but never used the bonding agent with it and trust me when I say that **** is not coming off.
I do agree the price could/should be lower but you have to pay to play and so far there are no other options.
So we have one person who is not happy and one who is. Did anyone else buy this diffuser and care to chime in?
My diffuser has about 95% perfect fitment. Just the very underside of it did not sit totally flush but I think that is because I was impatient and could have got it perfect and you cant see it unless you are under my car. As for the adhesive, it is VERY strong. I have used lots of product with 3M tape but never used the bonding agent with it and trust me when I say that **** is not coming off.
I do agree the price could/should be lower but you have to pay to play and so far there are no other options.
So we have one person who is not happy and one who is. Did anyone else buy this diffuser and care to chime in?
#140
Registered User
iTrader: (16)
well one its a civic not an S2000. which typically Civics get stolen becuase there are more around and are easier to steal then the S2k. people dont take S2k's to strip. they just slash the top and steal your interior bits to put in said civics. also its much easier to steal civic parts and flip them. its a lot harder to find someone to buy a stolen Mugen front bumper for an S2000 one because there are so little of them and are easy to track down because each piece is numbered. secondly the S2k community is a tight group which makes selling stolen parts much much harder. plus my car always sat in my garage. wayyyy to much money in that car to sit outside.
#141
The prices are not the only issue. My friend just spent over 3k on dry carbon fiber engine dress up kit for his GT-R. The entire problem is spending serious money for a sub par product and poor customer service.
The sad part is that they only made 20 intakes and only 5 diffusers and yet even with very limited numbers still have **** poor quality control.
#142
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: jacksonville, fl
Posts: 4,563
Likes: 0
Received 0 Likes
on
0 Posts
i saw chads and it looked great though, sucks about your problems. as for all your issues, the more pics and proof you have from when you first got it the better off you will be. just this thread alone will put pressure on them if they want to satisfy the rest of the community.
#146
IvoryGT has been producing carbon fiber parts for awhile now and always has 100% fitment. Even his prices are not as high as SE. PM him and ask if finish imperfections are normal. How do you think people would feel to get cf interior or head light housing from him that only fit 95%.
The prices are not the only issue. My friend just spent over 3k on dry carbon fiber engine dress up kit for his GT-R. The entire problem is spending serious money for a sub par product and poor customer service.
The sad part is that they only made 20 intakes and only 5 diffusers and yet even with very limited numbers still have **** poor quality control.
The prices are not the only issue. My friend just spent over 3k on dry carbon fiber engine dress up kit for his GT-R. The entire problem is spending serious money for a sub par product and poor customer service.
The sad part is that they only made 20 intakes and only 5 diffusers and yet even with very limited numbers still have **** poor quality control.
Ive heard bad fitment stories from other carbon/fiberglass companies , thats just how it turns out, unfortunately, unless you have the resources like a car manufacturer to make perfect fitment molds, its never 100% fitment for aftermarket parts, that includes top secret, zele, nismo etc....
Whosyourbuddy, im not taking sides, dry carbon process is not cheap and maybe SE could have made it cheaper but your making an a$$ out of your self when you start comparing wet layed, overlayed parts against original dry carbon parts
#147
Registered User
iTrader: (9)
Gee another business owner talking smack, of course after they have your money.
I dont understand these situations, People that own businesses that sell parts pay a fraction of the retail value. Sometimes in business you gotta as my dad once said, "take one for the team"
except when selling damaged car parts, of course they can make it right but why should they?? not like they want to.
That would be the proper thing.
I dont understand these situations, People that own businesses that sell parts pay a fraction of the retail value. Sometimes in business you gotta as my dad once said, "take one for the team"
except when selling damaged car parts, of course they can make it right but why should they?? not like they want to.
That would be the proper thing.
#148
Registered User
iTrader: (5)
Gee another business owner talking smack, of course after they have your money.
I dont understand these situations, People that own businesses that sell parts pay a fraction of the retail value. Sometimes in business you gotta as my dad once said, "take one for the team"
except when selling damaged car parts, of course they can make it right but why should they?? not like they want to.
That would be the proper thing.
I dont understand these situations, People that own businesses that sell parts pay a fraction of the retail value. Sometimes in business you gotta as my dad once said, "take one for the team"
except when selling damaged car parts, of course they can make it right but why should they?? not like they want to.
That would be the proper thing.
![EEK!](https://www.myg37.com/forums/images/smilies/eek.gif)
#149
Registered User
Thread Starter
iTrader: (6)
Join Date: Sep 2003
Location: West Bloomfield, Michigan
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to the original thread that I created after installing the SE diffuser.
https://www.myg37.com/forums/modding...-diffuser.html
I originally stated fitment was GOOD, not great or perfect. I also early on mention the fit and FINISH issues. I didn't feel it necessary to take pics of every blemish or mark in the finish. But, those marks were 100% there even before installation. I was disappointed in the blemishes/marks but thought that I'd overlook them being as the part installed at the bottom the the rear bumper (who's see them?) but after the fitment wasn't up to par either, I decided it was unacceptable and it was going back. It was removed either a day or two after the pictures and was only driven one evening.
Now, I am out $579 (to be exact, I believe) and have no rear CF diffuser. I don't want to pay "half" to have 3M adhesive reapplied and have it shipped back. I returned it for a reason obviously.
As far as I am concerned right now I have been robbed of my money. Great Vendor we have her on MyG37.com. I think they should be BANNED after how this (my) situation was handled. Wait, it wasn't! I was ROBBED!
Potential customers of Status Elite (if there are/will be any after this thread) BEWARE.
https://www.myg37.com/forums/modding...-diffuser.html
I originally stated fitment was GOOD, not great or perfect. I also early on mention the fit and FINISH issues. I didn't feel it necessary to take pics of every blemish or mark in the finish. But, those marks were 100% there even before installation. I was disappointed in the blemishes/marks but thought that I'd overlook them being as the part installed at the bottom the the rear bumper (who's see them?) but after the fitment wasn't up to par either, I decided it was unacceptable and it was going back. It was removed either a day or two after the pictures and was only driven one evening.
Now, I am out $579 (to be exact, I believe) and have no rear CF diffuser. I don't want to pay "half" to have 3M adhesive reapplied and have it shipped back. I returned it for a reason obviously.
As far as I am concerned right now I have been robbed of my money. Great Vendor we have her on MyG37.com. I think they should be BANNED after how this (my) situation was handled. Wait, it wasn't! I was ROBBED!
Potential customers of Status Elite (if there are/will be any after this thread) BEWARE.