Help Bumper removal allignment issue
#31
Registered Member
Thread Starter
Join Date: Jul 2008
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
Hey,
I got my bodyshop to take a look and they fixed it already. It was just an alignment issue.. I guess it takes sometime to carefully put it back in and adjust before screwing the bolts to get it perfect.
I got my bodyshop to take a look and they fixed it already. It was just an alignment issue.. I guess it takes sometime to carefully put it back in and adjust before screwing the bolts to get it perfect.
#32
Registered User
Join Date: Mar 2009
Location: New York
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
How long did it take? I'm telling you, I have the same exact issue, except mine happened after I scraped a curb with the bottom of my bumper. How long did it take?
#33
Registered Member
Thread Starter
Join Date: Jul 2008
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
hm.. well if it's cause of a scrape then it might be something else. I'm not an expert but it's possible the bracket is messed up or the bumper could be warped so the fit isn't perfect anymore? I would take it to a body shop n get them to take a look. Labour shouldn't be more than 1 hour I would think.. some guys on here can remove and put the bumper back on in like 10-15mins
#35
Had the same issue . I loosened and repositioned the front section of the fender liner. Where the bumper meets the fender, there is a 6mm bolt (10mm)head. Loosened this bolt pulled the bumper out a very small amount till flush and tightened. Then pushed the bumper corner in at the headlight and it remained. This is a subtle adjustment but it fixed the issue for me.
Thread
Thread Starter
Forum
Replies
Last Post
Lt8Che
D.I.Y. Installations/Modifications
91
04-08-2022 04:55 PM
redlinernyc
Engine, Drivetrain & Forced-Induction
10
02-29-2016 11:06 PM