LEDs installed for vanity mirrors, doors and license plate
#47
Post Whore
Ohh, the videos help a lot... haha. Now I feel kinda retarded.
kkokko: there's a thread on how to take apart the tail lights to access the reverse light bulbs. I think it's this one. Let me know if you can figure out how to do it!
Vanity mirrors are pretty easy because there's actually a little slot on the right side for you to put a flat head in and pry out – just be very careful, it's pretty delicate!
The glove compartment light is a giant pita to change because you have to pull out the whole thing (page 100 in the INL manual and page 21 in the IP manual).
kkokko: there's a thread on how to take apart the tail lights to access the reverse light bulbs. I think it's this one. Let me know if you can figure out how to do it!
Vanity mirrors are pretty easy because there's actually a little slot on the right side for you to put a flat head in and pry out – just be very careful, it's pretty delicate!
The glove compartment light is a giant pita to change because you have to pull out the whole thing (page 100 in the INL manual and page 21 in the IP manual).
#50
Yea.. I looked at the glove compartment one and think it's not worth the hassle....
I wanna get WLED-WHP from superbright leds for the tails and for the trunk.. right now i have 12 led for the trunk and I want the dome to close lol..
Going to order the vanity mirror ones, but they want 10$ for shipping ot canada BOoo
I wanna get WLED-WHP from superbright leds for the tails and for the trunk.. right now i have 12 led for the trunk and I want the dome to close lol..
Going to order the vanity mirror ones, but they want 10$ for shipping ot canada BOoo
Ohh, the videos help a lot... haha. Now I feel kinda retarded.
kkokko: there's a thread on how to take apart the tail lights to access the reverse light bulbs. I think it's this one. Let me know if you can figure out how to do it!
Vanity mirrors are pretty easy because there's actually a little slot on the right side for you to put a flat head in and pry out – just be very careful, it's pretty delicate!
The glove compartment light is a giant pita to change because you have to pull out the whole thing (page 100 in the INL manual and page 21 in the IP manual).
kkokko: there's a thread on how to take apart the tail lights to access the reverse light bulbs. I think it's this one. Let me know if you can figure out how to do it!
Vanity mirrors are pretty easy because there's actually a little slot on the right side for you to put a flat head in and pry out – just be very careful, it's pretty delicate!
The glove compartment light is a giant pita to change because you have to pull out the whole thing (page 100 in the INL manual and page 21 in the IP manual).
#51
Post Whore
Get them from this seller on ebay! Two 31mm festoon bulbs for about $10 including shipping! That's where I got mine.
#52
Get them from this seller on ebay! Two 31mm festoon bulbs for about $10 including shipping! That's where I got mine.
http://cgi.ebay.ca/1pc-31mm-Vanity-3...713.m153.l1262
Looks like its 31mm by 6mm vs 31mm by 5mm did yours fit properly?
#53
Registered Member
Thread Starter
Are these the ones
http://cgi.ebay.ca/1pc-31mm-Vanity-3...713.m153.l1262
Looks like its 31mm by 6mm vs 31mm by 5mm did yours fit properly?
http://cgi.ebay.ca/1pc-31mm-Vanity-3...713.m153.l1262
Looks like its 31mm by 6mm vs 31mm by 5mm did yours fit properly?
#54
Registered User
iTrader: (2)
This is what my setup is going to be. Let me know what you guys think.
WLED-x5 Cool White (License Plate)
921-x12 Blue (Doors) For a little contrast with the white
921-x12 Cool White (Map/Dome)
WLED-WHP Pure White (Reverse Lights & Trunk)
3 LED SMT Festoon (Vanity)
Has anyone changed their city lights? If so, what kind and where you bought it from?
WLED-x5 Cool White (License Plate)
921-x12 Blue (Doors) For a little contrast with the white
921-x12 Cool White (Map/Dome)
WLED-WHP Pure White (Reverse Lights & Trunk)
3 LED SMT Festoon (Vanity)
Has anyone changed their city lights? If so, what kind and where you bought it from?
#58
Registered Member
Thread Starter
i got mines at autozone. i got these ones:
they are bigger than the usual size. they light up much brighter. i got the amber color. i shoulda took a pic of the actual bulb but i put them on already. u can actually see the bulb in the pic. its the wedge bulb in the middle towards the left. i was scared they didnt fit, but they did.
they are bigger than the usual size. they light up much brighter. i got the amber color. i shoulda took a pic of the actual bulb but i put them on already. u can actually see the bulb in the pic. its the wedge bulb in the middle towards the left. i was scared they didnt fit, but they did.
#59
Florida G Club
iTrader: (7)
This is what my setup is going to be. Let me know what you guys think.
WLED-x5 Cool White (License Plate)
921-x12 Blue (Doors) For a little contrast with the white
921-x12 Cool White (Map/Dome)
WLED-WHP Pure White (Reverse Lights & Trunk)
3 LED SMT Festoon (Vanity)
Has anyone changed their city lights? If so, what kind and where you bought it from?
WLED-x5 Cool White (License Plate)
921-x12 Blue (Doors) For a little contrast with the white
921-x12 Cool White (Map/Dome)
WLED-WHP Pure White (Reverse Lights & Trunk)
3 LED SMT Festoon (Vanity)
Has anyone changed their city lights? If so, what kind and where you bought it from?
Very nice. Pretty much exactly what I am going with.