thexfactor

HERE, the poster says to replace the reverse lights with:

194 168 W5W 2825 SMT Tower III from autolumination.com

Im making an order from superbrightleds.com for all my other replacements (map, door, license, trunk) and I want to make one big order so i want to know if i can replace the reverse lights with these:

http://www.superbrightleds.com/mini-wedge.html#921/912

The stock reverse lights are "921" bulbs, and on the link above, at the bottom, it says "Replaces: 194, 921, 922..."

Anyone know one way for sure?

wrathletik1

iTrader: (2)

The 921x12 is the exact one I used. It fits but it is kind of loose, so I had to secure them with some medical tape. I'm thinking the 921x9 would fit better and more securely. If you use the 921x9, let us know if it is a snug fit.

thexfactor

The only differences between those two lights as far as I can see, is that according to superbrightleds.com (and I'm doing this from memory from my blackberry) is that the 921x9 is .05 inches longer (which I'm assuming is the reason your hoping it'll be tighter) and it is a "narrow viewing angle" bulb (as opposed to a "wide" viewing angle)

Foresee any problems there?

TerribleONE453

should work fine...

thexfactor

Did you replace your reverse lights? If so, with what?

DrJones

iTrader: (1)

Anyone seen the reverse lights in the Cadillac CTS/DTS? They are very nice. I've been searching around looking for the bulbs and/or LED's that GM uses.

No luck yet.

shumby

iTrader: (3)

Dont for get about the vanity mirror lights. Autpillumination for them too

gan78mao

iTrader: (1)

yea i was suprised when i saw them.
i thought it was some guy tat replaced his reverse bulb, but happened to be all the CTS and DTS i saw.

MaxToTheG37

iTrader: (3)

I have bulbs at home to change them out....but Im still nervous to try and pull the tail lights out and yank....

wrathletik1

iTrader: (2)

I ordered 2 super white vanity bulbs from autolumination and they do not match, I asked for an exchange and they told me to buy another one. Does that sound right to you?

wrathletik1

iTrader: (2)

Yes you have to yank, but be careful bro. I scratched my bumper on the first light I did.

]\[ /-\ ]\/[

iTrader: (3)

don't yank...push the tailight out from the inside

thexfactor

yea, its super hot, and its stock...

thexfactor

how long did the whole process take?

wrathletik1

iTrader: (2)

I'm thinking the WLED-WHP would also fit because I put the Wledx5 back there at first and those fit perfectly, but were not as bright as the 921x12. The WLED-WHP are super bright and nice, I have one in my trunk.