When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have the invisicord for my V1 in my G37. Can anyone tell me what holes to plug the probes into in the back of the mirror?? Thanks!
Originally Posted by SPOHN
Originally Posted by Ahujadaddy View Post
OK, IT WORKS! =)
Thnx for givin me the the confidence to make it work, memphoman and bolaber.
The BLACK (middle wire) is indeed the ground, and the BROWN striped wire (DRIVER side) is the Switched 12v+
The green wire (passenger side) was always on power.
/\pretty obvious, but in case anyone is confused, the above colors are for the powered mirror wires...
___________________ G37Sall options except 4was...
Is that a second rear view mirror approximately in the center of your windshield?
It seems like that along with the detector itself, would partially block your forward vision if you drive with it there...
___________________ G37Sall options except 4was...
Is that a second rear view mirror approximately in the center of your windshield?
It seems like that along with the detector itself, would partially block your forward vision if you drive with it there...
___________________ G37Sall options except 4was...
That's a baby mirror and is off to the right. It doesn't look like it but vision isn't blocked at all...