Why have a keyhole with Intelligent Key... Oh wait I don't
#21
Registered User
Thread Starter
iTrader: (4)
Join Date: May 2005
Location: Florida
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
*I take ZERO responsibility if you **** up your car following these directions*
Lock your door.
Pull the door handle as if you were going to open it, then put a rolled up towel in-between the handle and the door to keep it open.
Then using the pic below as reference, use a small flathead screwdriver or what ever you have that is able to get into the space to lift the tab up. As you are lifting the tab, pull on the cover to remove it.
When you receive the part it comes attached to the mounting plate. See pic below. You are going to have to follow the same procedure to remove it from the mounting plate as you will when you take it off the car. This will give you an understanding of what you need to do on the car to remove it.
Lock your door.
Pull the door handle as if you were going to open it, then put a rolled up towel in-between the handle and the door to keep it open.
Then using the pic below as reference, use a small flathead screwdriver or what ever you have that is able to get into the space to lift the tab up. As you are lifting the tab, pull on the cover to remove it.
When you receive the part it comes attached to the mounting plate. See pic below. You are going to have to follow the same procedure to remove it from the mounting plate as you will when you take it off the car. This will give you an understanding of what you need to do on the car to remove it.