Anyone else having window problems?
09-29-2007, 10:54 PM
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: West Palm Beach NO MORE SNOW!
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else having window problems?
I got my car tinted and the passenger window wouldn't roll down after the five days.
Got that fixed,
now I got a sub installed in my trunk and now when I turn the car off and open the door the windows roll down and won't roll back up.
The stereo place said they only tapped into the power from the amp and they don't think it was something they did. I'm taking it to the dealer on Monday to see whats wrong...
Anyone else have any of these problems, or any solutions??
Got that fixed,
now I got a sub installed in my trunk and now when I turn the car off and open the door the windows roll down and won't roll back up.
The stereo place said they only tapped into the power from the amp and they don't think it was something they did. I'm taking it to the dealer on Monday to see whats wrong...Anyone else have any of these problems, or any solutions??
09-30-2007, 01:06 AM
#2
Registered User
Join Date: Mar 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
See if this works:
If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power window
system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window more than halfway by
operating the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
If the power window automatic function does
not operate properly after performing the procedure
above, have your vehicle checked by an
INFINITI dealer.
Originally Posted by Owner's manual, 2-51
If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power window
system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window more than halfway by
operating the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
If the power window automatic function does
not operate properly after performing the procedure
above, have your vehicle checked by an
INFINITI dealer.
Thread
Thread Starter
Forum
Replies
Last Post
butwhatuptho
Audio, Video & Electronics
15
10-04-2015 07:51 PM
RexHavoc
Private Classifieds
4
10-02-2015 11:47 AM
FlyIce
G37 Sedan
7
09-29-2015 04:07 AM
