Nikku Detailed: BMW 328i Coupe Sapphire Black
03-23-2010 | 12:47 AM
#1
Thread Starter
Registered User
Joined: Apr 2009
Posts: 50
Likes: 0
From: Toronto, Ontario
Nikku Detailed: BMW 328i Coupe Sapphire Black
Client brought this in for a detail.
The car has been resprayed twice. The bumper was resprayed, the rear fender was resprayed and the driver side door and front fender was blended when repainted.
The issue with the repaint was the clear coat was very very soft. So as expected the area was heavily swirled.
Paint readings were healthy all around from oem to the repainted areas.
Anyways on to the detail.
Wash
CG Citrus Wash and Gloss
1z Blitz
Grit Guard
Sheepskin Wash Mitts
Waffle Weave Drying Towel
Buffing Towels
Clay
Riccardo
CG Quick Synthetic Quick Detailer
Paint Correction
Menzerna IP
Menzerna SIP
Menzerna 106f
Menzerna PF
Menzerna PO85rd
M105
M205
Sonus White
Sonus Blue
BF White
BF Green
BF Black
Equipment
Metabo
PC7424 (customers)
PC7424XP
Halogen
LSP
Collinite 476's
BEFORE
DURING
With the paint correction there were a few things to consider the repainted areas and the oem areas. The hood was hit with Intensive Polish then followed up with PO85rd. The bumper that was repainted was hit with M105 and then M205. The soft repainted and blended areas surrounding the rear fender was hit with a variation of SIP, PF, 106ff and PO85rd polishes.
PRE-LSP
The lines by the sun reflection are not holograms. Coincidentally planes left a trail of cloud or whatever you call it above. At first it freaked me out but realized they were cloud lines. Anyways on with the rest of the pics.
A few shots after Collinite
Thanks for looking.
The car has been resprayed twice. The bumper was resprayed, the rear fender was resprayed and the driver side door and front fender was blended when repainted.
The issue with the repaint was the clear coat was very very soft. So as expected the area was heavily swirled.
Paint readings were healthy all around from oem to the repainted areas.
Anyways on to the detail.
Wash
CG Citrus Wash and Gloss
1z Blitz
Grit Guard
Sheepskin Wash Mitts
Waffle Weave Drying Towel
Buffing Towels
Clay
Riccardo
CG Quick Synthetic Quick Detailer
Paint Correction
Menzerna IP
Menzerna SIP
Menzerna 106f
Menzerna PF
Menzerna PO85rd
M105
M205
Sonus White
Sonus Blue
BF White
BF Green
BF Black
Equipment
Metabo
PC7424 (customers)
PC7424XP
Halogen
LSP
Collinite 476's
BEFORE
DURING
With the paint correction there were a few things to consider the repainted areas and the oem areas. The hood was hit with Intensive Polish then followed up with PO85rd. The bumper that was repainted was hit with M105 and then M205. The soft repainted and blended areas surrounding the rear fender was hit with a variation of SIP, PF, 106ff and PO85rd polishes.
PRE-LSP
The lines by the sun reflection are not holograms. Coincidentally planes left a trail of cloud or whatever you call it above. At first it freaked me out but realized they were cloud lines. Anyways on with the rest of the pics.
A few shots after Collinite
Thanks for looking.
05-02-2010 | 06:49 PM
#3
Registered Member
Joined: May 2008
Posts: 598
Likes: 0
From: Glendale, California
Menzerna IP
Menzerna SIP
Menzerna 106f
Menzerna PF
Menzerna PO85rd
M105
M205
Sonus White
Sonus Blue
BF White
BF Green
BF Black
Did u really use all those polishes?
I typicaly use IP and106FF only. 106 to finish off
Menzerna SIP
Menzerna 106f
Menzerna PF
Menzerna PO85rd
M105
M205
Sonus White
Sonus Blue
BF White
BF Green
BF Black
Did u really use all those polishes?
I typicaly use IP and106FF only. 106 to finish off
05-03-2010 | 10:25 PM
#4
Thread Starter
Registered User
Joined: Apr 2009
Posts: 50
Likes: 0
From: Toronto, Ontario
Hope this clarifies things.
Thread
Thread Starter
Forum
Replies
Last Post
