2012 Sedan non bose & nav systems - backup camera
#1
2012 Sedan non bose & nav systems - backup camera
Hi All,
Today I removed the trunk inside cover to see if the harness has a pre-configured camera plug and I found 1 plug that wasn't in use.
can anyone advise if that is for the trunk lid camera?
I am interested in buying the trunk lid with the camera slot and install a camera in it.
BTW I also have the PX6 pheonix screen on its way.
Thanks.
Today I removed the trunk inside cover to see if the harness has a pre-configured camera plug and I found 1 plug that wasn't in use.
can anyone advise if that is for the trunk lid camera?
I am interested in buying the trunk lid with the camera slot and install a camera in it.
BTW I also have the PX6 pheonix screen on its way.
Thanks.
#2
Registered Member
iTrader: (3)
Can you show a picture of the wires for the 4-pin connector circled here:
The camera connector will have four (4) wires: red, black, yellow, and white. Here is a pic of the camera connector itself:
I am 99% confident your mystery connector is for the camera.
Hope this helps...
The camera connector will have four (4) wires: red, black, yellow, and white. Here is a pic of the camera connector itself:
I am 99% confident your mystery connector is for the camera.
Hope this helps...
Last edited by ILM-NC G37S; 02-28-2020 at 09:19 AM.
#4
Can you show a picture of the wires for the 4-pin connector circled here:
The camera connector will have four (4) wires: red, black, yellow, and white. Here is a pic of the camera connector itself:
I am 99% confident your mystery connector is for the camera.
Hope this helps...
The camera connector will have four (4) wires: red, black, yellow, and white. Here is a pic of the camera connector itself:
I am 99% confident your mystery connector is for the camera.
Hope this helps...
I have only 2 wires, black & green -
WIRING HARNESS OEM 24027-1NA0B
I wonder if I can change it to the camera harness...
#5
Registered Member
iTrader: (3)
Should you decide to later install a spoiler you will need this connector for the 3rd brake light.
You can repurpose this connector, but in the end you will still have to run wires from your headunit to the camera.
Last edited by ILM-NC G37S; 03-05-2020 at 12:52 PM.