Radio knob that fits G37 sedan
#1
Radio **** that fits G37 sedan
Not sure if someone research into this before, but the Carsmo similar **** I found is like this
Sato Parts USA - Product Detail - K-5475-S Metal ****
Will this fits? that's the question.
Sato Parts USA - Product Detail - K-5475-S Metal ****
Will this fits? that's the question.
#2
Registered Member
Lots of folks like the Carsmo ***** and they are indeed quality products. If you don't want to spend that much, I got these on ebay for $5 and had no issues. You'll even get a spare. Some users have reported having to put teflon tape over the spindle to get them to grab. It's obviously not Carsmo quality, but looks great. I thought that little indicator line on them would bother me (since the ***** free-spin), but it doesn't.
The following users liked this post:
2011G37JOHNBEST (04-29-2016)
#3
thanks for sharing.
i gotta be honest, $60 tag for that Carsmo thing is just too overpriced. I'm gonna give this ebay item a shot. Matter fact I just use them for look - i control radio/music primiarly on steering wheel
i gotta be honest, $60 tag for that Carsmo thing is just too overpriced. I'm gonna give this ebay item a shot. Matter fact I just use them for look - i control radio/music primiarly on steering wheel
#6
Movin On!
iTrader: (13)
Yep, at least a half dozen have them around here, including me
4pcs New 21mm x 17mm High Silver Amplifier Test Volume Tone Rotary Control **** | eBay
4pcs New 21mm x 17mm High Silver Amplifier Test Volume Tone Rotary Control **** | eBay
The following users liked this post:
2011G37JOHNBEST (04-30-2016)
#9
Registered Member
I sent this to OP in a PM, but figured others might want to see. For me they fit great, I didn't have to add any tape to the spindle, if anything, on one of my radio ***** I had to push it in a bit hard to get it on. the inside of the **** is soft plastic, and the spindle is metal, so I think I bored it out a little mashing it in. No harm or lost functionality though. The ***** go into the dash, so there's no gap. Some shadow in this pic makes it look like the **** doesn't go past the facing, but it does. Here's a pic
The following users liked this post:
2011G37JOHNBEST (04-30-2016)
The following users liked this post:
2011G37JOHNBEST (04-30-2016)
The following users liked this post:
2011G37JOHNBEST (05-02-2016)
#14
DIY Cheapskate/Mod
Haha, I have those ebay ones as well. I actually like the lines on them more than carsmo, the light from the glow around the **** looks cooler. As a bonus, when its really cold or hot, carsmo ***** tend to slide off easily due to metal expansion, the ebay ones dont.
Ugh, best pic I got, I need to take some proper interior shots in daylight...
NVM!!! FOUND ONE!!! Still terrible lighting, but closer shot.
Ugh, best pic I got, I need to take some proper interior shots in daylight...
NVM!!! FOUND ONE!!! Still terrible lighting, but closer shot.