Group Buy 2010 Navigation Screen Interface
#92
I got my carpc to send video through the RGB input. The resolution is wayyyy better. It is very close to the full resolution of the screen. I'll try to post a picture later.
The GVIF box is the way to go for Carpc install. I'm running at 800x480 resolution.
If anyone is interested in doing this, you need a video card capable for composite sync and compatible with powerstrip. I'm running ATI HD 4350.
Settings for powerstrip:
+ Horizontal sync
- Vertical sync
Composite sync
32 mhz pixel clock
60hz refresh rate
The GVIF box is the way to go for Carpc install. I'm running at 800x480 resolution.
If anyone is interested in doing this, you need a video card capable for composite sync and compatible with powerstrip. I'm running ATI HD 4350.
Settings for powerstrip:
+ Horizontal sync
- Vertical sync
Composite sync
32 mhz pixel clock
60hz refresh rate
#93
Modme,
Are you controlling the touchscreen with this module? Do you need to wire in a touchscreen controller between your carpc (or other device) and this unit to be able to control it with the existing touchscreen? If so, any chance you could throw up a basic schematic of how you have it connected.
Thanks
Al
Are you controlling the touchscreen with this module? Do you need to wire in a touchscreen controller between your carpc (or other device) and this unit to be able to control it with the existing touchscreen? If so, any chance you could throw up a basic schematic of how you have it connected.
Thanks
Al
#96
Registered Member
I got my carpc to send video through the RGB input. The resolution is wayyyy better. It is very close to the full resolution of the screen. I'll try to post a picture later.
The GVIF box is the way to go for Carpc install. I'm running at 800x480 resolution.
If anyone is interested in doing this, you need a video card capable for composite sync and compatible with powerstrip. I'm running ATI HD 4350.
Settings for powerstrip:
+ Horizontal sync
- Vertical sync
Composite sync
32 mhz pixel clock
60hz refresh rate
The GVIF box is the way to go for Carpc install. I'm running at 800x480 resolution.
If anyone is interested in doing this, you need a video card capable for composite sync and compatible with powerstrip. I'm running ATI HD 4350.
Settings for powerstrip:
+ Horizontal sync
- Vertical sync
Composite sync
32 mhz pixel clock
60hz refresh rate
#97
I used an older video card, Anti HD 4359 which supports composite sync. Then I used power strip to adjust the horizontal and vertical sync rates. Qdis just recently released a demise called SMI that might be able to convert HDMI to rgb. I might experiment with this new product soon,
#100
Registered User
iTrader: (1)
Wow I searched very long to find this thread. Finally! I just want to be sure I'm getting the right box. It know it's 2 years later but their site has two different modules and both say they support Nissan/Infiniti.
This one. (GVIF Interface for Lexus/Toyota/Land Rover/Nissan/Jaguar)
GVIF Interface for Lexus/Toyota/Land Rover/Nissan/Jaguar - GsmServer
And this one. (GVIF Interface for Nissan / Infiniti)
GVIF Interface for Nissan / Infiniti - GsmServer
This one. (GVIF Interface for Lexus/Toyota/Land Rover/Nissan/Jaguar)
GVIF Interface for Lexus/Toyota/Land Rover/Nissan/Jaguar - GsmServer
And this one. (GVIF Interface for Nissan / Infiniti)
GVIF Interface for Nissan / Infiniti - GsmServer
#103
Registered Member
^^^ any pics - did you do install? sounds like something i want to add to mine....
#105
Registered User
I know this thread is old but I am wanting to find out where I can get the GVIF interface that ModMe got. Model: QVL - GF08 - V7
PRODUCT CODE: GF08 - 1106 - 004
The place he originally bought his first one from does not list this model. I think I have a line on the 2010 Navi screen for $100 and I would love to add this interface so I can complete my CarPC. I have looked for this information for over a year and just found this thread. Any help would be appreciated.
PRODUCT CODE: GF08 - 1106 - 004
The place he originally bought his first one from does not list this model. I think I have a line on the 2010 Navi screen for $100 and I would love to add this interface so I can complete my CarPC. I have looked for this information for over a year and just found this thread. Any help would be appreciated.