cvipgo

iTrader: (5)

I was ready to install the NAV by pass KP NI35 but ran into issue that the instructions are poor plus the connector in vert has 2 grey, purple wires..
I completed the black and red wire solder on the OK PWB but now I am stuck - help please,,,,

Do I have the correct connectors or ....?

Any one of you have done this mod might have the answer- here are few shots





Thanks

hispeed-lowdrag

iTrader: (7)

Go read the forum rules. You can't talk about this on here. There are other forums that allow it, but not here. get ready for this thread to be closed

IBLT!!!!

cvipgo

iTrader: (5)

and why's that ?

is this not a forum for g-Vert,

help me with the forum rules?

Weiboy718

iTrader: (10)

dude, you are tripping! He's doing the nav bypass. How is that against the forum rules.

Weiboy718

iTrader: (10)

OP, check you pm. Sending you a link and I hope it'll help.

cvipgo

iTrader: (5)

Yes thanks sedan and convertible connectors with number of wires is different..

connector in vert has 2 grey, 2 purple wires..

I'll have to do my week end study on ESM wiring. Thanks but

hispeed-lowdrag

iTrader: (7)

Haha **** my bad OP. you're right Wei...I'll blame it on long flights all week. I made a noob mistake and thought it was the movie hack. My bad

cvipgo

iTrader: (5)

OK,now give me a solution to my query if you have one or take a nap .. even KPT is stumped too... and going in circles....

cereal2k

iTrader: (10)

someone did this on the vert, it's in the KPT thread I think about the nav bypass.

g37vanbc

iTrader: (2)

Use the purple/grey wire on the left of picture

Use the grey one closest to the purple/grey wire

This is how i installed mine in my vert.

cvipgo

iTrader: (5)

Thanks a lot, I knew some one will have answer....

bschurr

iTrader: (2)

Smurf -
Did you get this worked out? I am in San Fran on business and won't be home until Monday But i can consult my notes then if needed. I installed this over a year ago with no issues.

Please let me know if you need help.

cvipgo

iTrader: (5)

B

Do you have Tech and Sports package in your car? if not then the connector would not have 2 gray and 2 purple wires that's what threw a curve (lost whole so. calif lovely day). I contacted KP and he did not know either so I decided to consult myG37 brain trust and g37vanbc answered my question and I translated into photo.


... Thanks a bunch.
PS: KPT instructions are poor at best - felt like as if these were written in China and not USA.

Thanks

bschurr

iTrader: (2)

Yes, my car is fully loaded including tech & sport packages.
The really funny part is that I installed the first nav module in a vert & I gave Kevin (KP Tech) feedback regarding the details. As it turned out, the wiring is identical to the coupe. Looking at the photo, I do recall the issue you describe but I also had the wiring diagram from the service manual and used the actual #s of each wire to determine to correct connections.

Glad it all worked out for you (finally). Take care!

cvipgo

iTrader: (5)

Thanks for your help B, issues resolved - KPT wasn't of much help!