Hardwire Your Radar Detector with StealthCords
#61
question to all of you V1 guys, I have the on dash display as well and when I had my Z I had it hard wired, if I want to use the stealth cord and mount the on dash display above my sterring column where or how can I hook this up 2?
#62
Help with the Stealth Cord
Hey guys I bought the 8" stealth cord too, and I see all you guys having no problem with your installations. I cant seem to get the probes into the back of the rear view mirror...they just wont fit! Anyone else have that problem> of any ideas how to fix it? Thanks
#64
Yes, check the link in post #47 of this thread.
#71
The customer service provided by Stealthcords is second to none. I had an issue with my cord that was in no way their fault; it was 100% my mistake.
However, they went out of their way to help me out, and I couldn't be more appreciative.
I can't recommend them enough. It's rare in this day and age to have a company that will go that far out of their way to make sure you are satisfied with your purchase.
However, they went out of their way to help me out, and I couldn't be more appreciative.
I can't recommend them enough. It's rare in this day and age to have a company that will go that far out of their way to make sure you are satisfied with your purchase.
#72
I went with the 12" Stealth Cord, in my 2010 G, instead of the 8" so I could wrap the cord once around the mirror post. I live in SW Florida and it seems like my 8500 radar detector pulls loose from the windshield every so often, from the FL. heat and sun. I'm hoping if the suction cups break loose now that the radar detector will hang from the cord instead of bouncing off and damaging some part of the interior.
#73
Hey guys I bought the 8" stealth cord too, and I see all you guys having no problem with your installations. I cant seem to get the probes into the back of the rear view mirror...they just wont fit! Anyone else have that problem> of any ideas how to fix it? Thanks
Yes, check the link in post #47 of this thread.<!-- google_ad_section_end -->
I'm having the same problem the link isn't working, what is the fix. I can get the probes in barely, but they aren't secure and my V1 goes off and on intermintenly because of the lose connection. Very annoying.
Yes, check the link in post #47 of this thread.<!-- google_ad_section_end -->
I'm having the same problem the link isn't working, what is the fix. I can get the probes in barely, but they aren't secure and my V1 goes off and on intermintenly because of the lose connection. Very annoying.