dillyyo

Ok, not going to post the schematics on here, but this is what you need to tap into for a clean audio signal. The schematic naming is actually rather retarded, but I double checked. I will [post position / harness number into amp / color]

Front Right + / 33 / (R)ed
Front Right - /34 / (G)reen

Front Left + / 35 / (P)urple
Front Left - / 36 / (L) = Lavender ?? Confirm Please

Rear Right + / 26 / (B)rown
Rear Right - / 25 / (Y)ellow

Rear Left + / 24 / (V)iolet
Rear Left - / 23 / (SB) Sh%T Brown or Striped Black?? Confirm Please

Remote on (main amp) / 20 / (W)hite
Remote on (small amp) / 22 / (G)reen comes from main amp to small amp


When I get a chance, i will confirm voltage present at these input points on the amps. If anyone gets to it before me, please post your info.

MaxToTheG37

iTrader: (3)

Dillyyo... If you could... explain in lamens terms what to do when your going to tap the signal this way...
I am actually trying to figure this out as we speak... so if you can help quick id appreciate it!
thanks bro!