Ahujadaddy

Yeap! There was a good thread about in the beginning:
https://www.myg37.com/forums/showthr...=173936&page=2 <---- scroll down to post #27

I posted pictures in that thread using an invisicord (great customer service, prices, and quality... if ur interested). www.invisicord.com

To save you some reading (cuz at that point we were all just trying to figure stuff out):


The middle black wire is the negative. The brown wire, where u see that yellow probe in the pic, is the +12v switched power. The green wire, which is NOT USED, is the +12v constant power... if u put the positive terminal in this, ur RD wont turn off when u turn the car off... u hafta turn off and on manually.

Read that thread i linked you... should help!

w0ady

iTrader: (1)

+1 for invisicord and mike's mount. i had my 8500 with that setup on my 35 and i will be ordering from both of them again when i get my 37.

sxt173

2 questions:
- Is there anything special about the invisicord like in-line fuses, etc? I prefer do it yourself, and was thinking of cutting a standard phone cable (for Escort 8500) to my custom length and heat shrink 2 pin connectors onto it?
- Anybody think there is a drawback to also wiring my Garmin into this? I like to hardwire it and have it sit at the top left of my windshield.

The Garmin is my main reason I am thinking about just putting this together myself.

Thanks

Update: Sorry Guys, I found the answer to my own question: https://www.myg37.com/forums/audio-video-and-electronics/175561-improvised-invisicord-assembly-and-install-tip-for-radar-detector.html

Infinite G37S

I got the Bell STI, its pricey but it came with a cable that plugs into power and ground, in between has a control unit for adjusting volume and mutes alerts that with a little shaving fit perfectly between the seat heater switches and has a nice long cord going up to the unit itself placed just to the left of the rear view mirror. Totally stealth, great placement for the mute/volume button, looks clean (almost factory) and the STI is an AMAZING detector!

w0ady

iTrader: (1)

installed my 8500 with mikes mount and invisicord the other day. yay for 1st mod!

G35Coupe6MT05

V1 with mirror mount, scanguage II with mirror mount, cheetah gps, garmin nuvi with trapster pionts loaded. Remote display for V1 and remote mute micro switch behind light switch. Also m45 laser jammers, 3 heads in front, 1 in rear. Everything is hard wired through the cigarette lighter circuit so it turns on with car. Also did aux video / nav hack with switch in center console.

aznutx

^ cool setup

w0ady

iTrader: (1)

ya nice setup. im really wanting a laser jammer cause i need it lol.

Brentvino169

The Laser Interceptor laser jammer is what you are looking for then.

http://guysoflidar.com/july-2008/laser-jammer-test.html




http://guysoflidar.com/march-2007/la...mmer-test.html




Laser Interceptor website:

http://www.laser-interceptorusa.com/

Infinite G37S

Bell STI has a hardwired cord that comes with it along with a remote to mute and raise and lower the volume. I put the remote in the blank button between the seat heater switches, it fits ok but is slightly raised as you can see. Mouted the unit just to the left of the sunglass holder. I am going to have a custom bracket made for it and mount it upside down in the next few months.

sxt173

Nice setup, I like the remote in the empty button spot by the seat heaters. Just a tip, I would consider dremeling that remote so that it sits flush, i.e. if the circuit board and buttons are smaller then the box for the remote..

TicketProof

Just remember even if you can jam or block a cops radar or laser he can still issue a summons based on his independent estimation, I'm certified by suffolk county to be able to estimate speed within +/- 5mph. So if your haulin *** I'm still going to stop u regardless if I can get a proper radar reading.

Infinite G37S

I still have some work to do to it, I want to try and dremel out the switch cover to have the remote fit flush, I'm just not very "artistic" with the dremel!

aznutx

sad face but goes to the greater good. still sad face