19" wheel pic thread
#62
Premier Member
#64
Registered Member
Summer wheels
So pumped to say I took the dive into new summer wheels. Thank you to all who helped through the process, this site was very helpful. Specs and pix below.
Verde Paralax 19x8.5
Michelin Pilot Super Sport 245/40/19 all the way around
Verde Paralax 19x8.5
Michelin Pilot Super Sport 245/40/19 all the way around
The following users liked this post:
blnewt (05-12-2017)
#65
Administrator
iTrader: (9)
Nice, aggressive-looking wheels. Excellent (but dirty) performance tires. Crazy wheel gap now on display.
Did you put some kind of decal on painted, non-sport brakes? Cudos for the paint, and honestly that decal is kind of attractive. But... but...
Hope you remembered that drink on the roof before you drove away.
Did you put some kind of decal on painted, non-sport brakes? Cudos for the paint, and honestly that decal is kind of attractive. But... but...
Hope you remembered that drink on the roof before you drove away.
The following users liked this post:
mdigiorgio35 (05-11-2017)
#66
Registered Member
its a G37x sport, infiniti just decided to give the coupe the akebonos not the sedan and wanted something different. As for dirty tires, just literally had them done today and had to rush to work but don't worry they'll get a proper cleanse soon.
also i dont go anywhere without my dunks haha
also i dont go anywhere without my dunks haha
#67
Premier Member
Forgestar CF10 in Gunmetal
2010 G37XS sedan
BBK friendly - MSRP $1659 mated w/ Nitto Invo tires
Front - 19x9 +35 245/40ZR19
Rear - 19x10 +41 275/35ZR19
Schrader 33500 TPMS "EZ Sensors" - programmable at 315/314.9/433MHz
Weight
19x9 +35 = 21.5 pds
19x10 +41 = 22.5 pds
*weights vary with offset
Supension
-F/R - Stance XR1 coilover's w/ Swift spring upgrade.
-Rear - features an installed SPC Camber kit w/ toe bolts - and a 370Z rsb
-After alignment rear camber specs are: -1.0* -0.9*
-Height G/F: 26 5/8" front - 26.75" rear
*A front camber kit will be required on this specific G37xS. It's been widely reported that with coilover installations a front camber kit varies on a per vehicle basis.
No spacers used - that determination will be made after f/camber arm installation
2010 G37XS sedan
BBK friendly - MSRP $1659 mated w/ Nitto Invo tires
Front - 19x9 +35 245/40ZR19
Rear - 19x10 +41 275/35ZR19
Schrader 33500 TPMS "EZ Sensors" - programmable at 315/314.9/433MHz
Weight
19x9 +35 = 21.5 pds
19x10 +41 = 22.5 pds
*weights vary with offset
Supension
-F/R - Stance XR1 coilover's w/ Swift spring upgrade.
-Rear - features an installed SPC Camber kit w/ toe bolts - and a 370Z rsb
-After alignment rear camber specs are: -1.0* -0.9*
-Height G/F: 26 5/8" front - 26.75" rear
*A front camber kit will be required on this specific G37xS. It's been widely reported that with coilover installations a front camber kit varies on a per vehicle basis.
No spacers used - that determination will be made after f/camber arm installation
Last edited by Coltrane1; 05-11-2017 at 06:41 PM.
The following 6 users liked this post by Coltrane1:
blnewt (05-12-2017),
JMo757 (03-29-2021),
KellingFrenzy (10-01-2019),
MatthewC (06-17-2021),
Robert_K (05-21-2017),
and 1 others liked this post.
The following users liked this post:
Coltrane1 (05-12-2017)
#71
Registered Member
#72
Registered User
Join Date: Nov 2016
Location: Charlotte, NC from OH thru VA
Posts: 739
Received 71 Likes
on
65 Posts
I'm actually looking at some Work Wheels in 19x10 ET26. Did it take any fender work to make those fit? I assume you are running serious camber though too, correct?I don't want to "stance" this car like I did before but I would love to have the wheels I saw.
Sexy 'G' by the way! minus the window banner IMO
Sexy 'G' by the way! minus the window banner IMO
#73
Registered User
I'm actually looking at some Work Wheels in 19x10 ET26. Did it take any fender work to make those fit? I assume you are running serious camber though too, correct?I don't want to "stance" this car like I did before but I would love to have the wheels I saw.
Sexy 'G' by the way! minus the window banner IMO
Sexy 'G' by the way! minus the window banner IMO
Thanks the banner came from being bored lol
#74
Registered Member
iTrader: (4)
I'm actually looking at some Work Wheels in 19x10 ET26. Did it take any fender work to make those fit? I assume you are running serious camber though too, correct?I don't want to "stance" this car like I did before but I would love to have the wheels I saw.
Sexy 'G' by the way! minus the window banner IMO
Sexy 'G' by the way! minus the window banner IMO