anyone from the columbia/Ellicott city area? - Page 2

jester7500 · 03-03-2006, 06:09 PM

I'd like to help. I haven't examined the interior panels of the G, but if it's anything like the Z, then I'll know what to do. I had to damn near remove every interior panel in the Z when I did my audio install.

In the Z, there's a big grommet near the battery that runs into the passenger dash area. Cut an X in that gromment and use that to run your power wire into the car. To run the wire to the back, I am assuming you will have to remove all the panels that run along side the interior, unless someone else knows a short cut. G guys?

terryw · 03-03-2006, 06:14 PM

thanks jess,

um... for 03-04 Gs its a b*tch because you have to literally remove every panel including the dash and glove compartment. For 05+, theres just the panel on top of the clock... the silver aluminum trim, and the 2 side panels that needs to be removed. its a lot easier, i been through it with Chuck of digital Wheelz twice installing my 7inch touch screen. it takes about 10-15 min at most to remove the panels.

im just a bit nervous about routing the wires from the battery. other than that i dont think its too difficult.

yacoub · 03-03-2006, 06:52 PM

There's someone with a diamond graphite G with Nismo LMGT4s on it, in the same apartment community I'm about to move into. It's in Ellicott City area.

Virge · 03-17-2006, 04:19 PM

Audio Install DIY:

Aight guys everythings here...I'm trying to do this install tommorow afternoon sometime at my house. Devon said he might be able to stop by, if anyone else is interested give me a call on my cell (number is in members section) or send me a pm/email

terryw · 03-17-2006, 05:37 PM

i might be able to drop by, ill hit you up kunal

superchargedg · 03-17-2006, 07:13 PM

one day id like to meet up with you guys.im usally on my350z because nobody seems to be around for meets and what not.we always meet in columbia with a bunch of z,s and a few g,s.

LEK · 03-17-2006, 07:38 PM

Quote:

Originally Posted by superchargedg

one day id like to meet up with you guys.im usally on my350z because nobody seems to be around for meets and what not.we always meet in columbia with a bunch of z,s and a few g,s.

actually we're the most active club in the area.

superchargedg · 03-17-2006, 07:59 PM

Quote:

Originally Posted by LEK

actually we're the most active club in the area.

then when and where do you guys meet besides tyson va.

yacoub · 03-20-2006, 08:12 PM

seriously they always meet in VA

but yeah i just moved to columbia area so im down to meet up, but preferably on a friday night or saturday anytime or sunday afternoon, since i gotta get up early for work on weeknights (sun nite thru thurs nite).

Virge · 03-21-2006, 07:33 PM

alright last weekend didnt exactly "pan out" so i'll ask you guys at HH this week =)

vittriano · 04-01-2006, 03:50 PM

Quote:

Originally Posted by yacoub

There's someone with a diamond graphite G with Nismo LMGT4s on it, in the same apartment community I'm about to move into. It's in Ellicott City area.

That's me. I got my 05 back in October. I have done some stereo work in the past. If anyone needs any help just pm me.

superchargedg · 04-01-2006, 03:54 PM

Quote:

Originally Posted by vittriano

That's me. I got my 05 back in October. I have done some stereo work in the past. If anyone needs any help just pm me.

i see you only have 2 posts so welcome and if you ever wanna meet up check out the midatlantic section on my350z.com,we usually meet up at the columbia walmart off dobbin and 175.

Virge · 04-01-2006, 07:24 PM

hey vittriano i pmed you as well, but i'll be working on it tommorow at my house. if you can drop by that'd be great... Def my first install on the G. Lek and Khoa already helped with running the power wire (hardest part i think) on wed. All thats left is mounting amps (still havent decided where) and putting components up front.

yacoub · 04-01-2006, 09:38 PM

what time you guys getting together? i might be able to swing by too if you need another set of hands.

Virge · 04-01-2006, 09:52 PM

probably in the afternoon sometime

call my cell and i'll let you know

03-03-2006, 06:14 PM	#17
terryw Registered User Trader Score: (0) Join Date: Jul 2005 Location: University of Maryland Posts: 3,927	thanks jess, um... for 03-04 Gs its a b*tch because you have to literally remove every panel including the dash and glove compartment. For 05+, theres just the panel on top of the clock... the silver aluminum trim, and the 2 side panels that needs to be removed. its a lot easier, i been through it with Chuck of digital Wheelz twice installing my 7inch touch screen. it takes about 10-15 min at most to remove the panels. im just a bit nervous about routing the wires from the battery. other than that i dont think its too difficult. __________________ National [COLOR="Red"]G[/COLOR] Club ..now rocking a 6 pack

03-17-2006, 04:19 PM	#19
Virge straight to the bank... Trader Score: (1) Join Date: Nov 2004 Location: Ellicott City, MD Posts: 736	Audio Install DIY: Aight guys everythings here...I'm trying to do this install tommorow afternoon sometime at my house. Devon said he might be able to stop by, if anyone else is interested give me a call on my cell (number is in members section) or send me a pm/email __________________ [B]National[COLOR=Red]G[/COLOR]Club[/B][SIZE="1"] \|\| '05 [B]BLK[/B] 6mt Cpe \|\| [FONT=Arial][I][COLOR=Blue][COLOR=Black]DLS[/COLOR] [/COLOR]UP6, [COLOR=Black]JLA[/COLOR] 500/1 450/4 10W6V2[/I][/FONT] \|\| [FONT=Arial][I]MREV+, JWT PC/ZTube, Fast Intentions HFC/Intimidator Exhaust, 350z Tein H-tech, Overlays, 06' projectors w/ PIAA H1s[/I][/FONT][/SIZE]

03-17-2006, 05:37 PM	#20
terryw Registered User Trader Score: (0) Join Date: Jul 2005 Location: University of Maryland Posts: 3,927	i might be able to drop by, ill hit you up kunal __________________ National [COLOR="Red"]G[/COLOR] Club ..now rocking a 6 pack

03-21-2006, 07:33 PM	#25
Virge straight to the bank... Trader Score: (1) Join Date: Nov 2004 Location: Ellicott City, MD Posts: 736	alright last weekend didnt exactly "pan out" so i'll ask you guys at HH this week =) __________________ [B]National[COLOR=Red]G[/COLOR]Club[/B][SIZE="1"] \|\| '05 [B]BLK[/B] 6mt Cpe \|\| [FONT=Arial][I][COLOR=Blue][COLOR=Black]DLS[/COLOR] [/COLOR]UP6, [COLOR=Black]JLA[/COLOR] 500/1 450/4 10W6V2[/I][/FONT] \|\| [FONT=Arial][I]MREV+, JWT PC/ZTube, Fast Intentions HFC/Intimidator Exhaust, 350z Tein H-tech, Overlays, 06' projectors w/ PIAA H1s[/I][/FONT][/SIZE]

04-01-2006, 07:24 PM	#28
Virge straight to the bank... Trader Score: (1) Join Date: Nov 2004 Location: Ellicott City, MD Posts: 736	hey vittriano i pmed you as well, but i'll be working on it tommorow at my house. if you can drop by that'd be great... Def my first install on the G. Lek and Khoa already helped with running the power wire (hardest part i think) on wed. All thats left is mounting amps (still havent decided where) and putting components up front. __________________ [B]National[COLOR=Red]G[/COLOR]Club[/B][SIZE="1"] \|\| '05 [B]BLK[/B] 6mt Cpe \|\| [FONT=Arial][I][COLOR=Blue][COLOR=Black]DLS[/COLOR] [/COLOR]UP6, [COLOR=Black]JLA[/COLOR] 500/1 450/4 10W6V2[/I][/FONT] \|\| [FONT=Arial][I]MREV+, JWT PC/ZTube, Fast Intentions HFC/Intimidator Exhaust, 350z Tein H-tech, Overlays, 06' projectors w/ PIAA H1s[/I][/FONT][/SIZE]

03-03-2006, 06:09 PM	#16
jester7500 Registered User Trader Score: (0) Join Date: Feb 2005 Location: SD Posts: 433	I'd like to help. I haven't examined the interior panels of the G, but if it's anything like the Z, then I'll know what to do. I had to damn near remove every interior panel in the Z when I did my audio install. In the Z, there's a big grommet near the battery that runs into the passenger dash area. Cut an X in that gromment and use that to run your power wire into the car. To run the wire to the back, I am assuming you will have to remove all the panels that run along side the interior, unless someone else knows a short cut. G guys?

03-03-2006, 06:52 PM	#18
yacoub Registered User Trader Score: (0) Join Date: Jul 2004 Posts: 388	There's someone with a diamond graphite G with Nismo LMGT4s on it, in the same apartment community I'm about to move into. It's in Ellicott City area.

03-17-2006, 07:13 PM	#21
superchargedg Registered User Trader Score: (1) Join Date: Nov 2005 Location: maryland Posts: 423	one day id like to meet up with you guys.im usally on my350z because nobody seems to be around for meets and what not.we always meet in columbia with a bunch of z,s and a few g,s.

03-20-2006, 08:12 PM	#24
yacoub Registered User Trader Score: (0) Join Date: Jul 2004 Posts: 388	seriously they always meet in VA but yeah i just moved to columbia area so im down to meet up, but preferably on a friday night or saturday anytime or sunday afternoon, since i gotta get up early for work on weeknights (sun nite thru thurs nite).

04-01-2006, 09:38 PM	#29
yacoub Registered User Trader Score: (0) Join Date: Jul 2004 Posts: 388	what time you guys getting together? i might be able to swing by too if you need another set of hands.

04-01-2006, 09:52 PM	#30
Virge straight to the bank... Trader Score: (1) Join Date: Nov 2004 Location: Ellicott City, MD Posts: 736	probably in the afternoon sometime call my cell and i'll let you know __________________ [B]National[COLOR=Red]G[/COLOR]Club[/B][SIZE="1"] \|\| '05 [B]BLK[/B] 6mt Cpe \|\| [FONT=Arial][I][COLOR=Blue][COLOR=Black]DLS[/COLOR] [/COLOR]UP6, [COLOR=Black]JLA[/COLOR] 500/1 450/4 10W6V2[/I][/FONT] \|\| [FONT=Arial][I]MREV+, JWT PC/ZTube, Fast Intentions HFC/Intimidator Exhaust, 350z Tein H-tech, Overlays, 06' projectors w/ PIAA H1s[/I][/FONT][/SIZE]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode