<1" lowering - Page 2

mw09g37 · 11-11-2009, 09:20 PM

Quote:

Originally Posted by BocaIvan

Those are the numbers for the coupe not the sedan.

Sedan is 1.5F and 1.2R

yeah I was hoping the coupe drop would port over to the sedan too...

BocaIvan · 11-11-2009, 09:27 PM

It's not that low. I don't have any problems going over anything.

mw09g37 · 11-12-2009, 03:14 AM

fair enough. looks like it's between the Eibachs and the Tanabes.

those pics of 2GoRNot2G's G are nice. did the NF210s have rear sag issues or is that just w/ the X models?...

to the looks if it, it sounds like I'm going to go with the eibachs.. ha

BocaIvan · 11-12-2009, 06:11 AM

I'm not sure send him a PM. What wheels do you have?

mw09g37 · 11-12-2009, 11:35 AM

whichever setup I used will be going with the coupe 19s which plus wheels should be the same diameter as the 18s plus wheels.

BocaIvan · 11-12-2009, 01:17 PM

Cool, you should look into spacers. That way your wheels won't be tucked and they'll be flush with the fenders.

mw09g37 · 11-14-2009, 09:48 PM

cool I'll consider it,

Alright I'm getting it done this week lets see how they turn out.

11-11-2009, 09:27 PM	#17
BocaIvan Registered User 2009 Infiniti G37 Trader Score: (0) Join Date: Aug 2009 Location: Delray Beach, FL Posts: 156	It's not that low. I don't have any problems going over anything. __________________ 09 G37 PG \|Eibach Prokit\|Ichiba spacers\|GReddy SE\|Injen SRI\|VLEDS\|AutoKits-X diffuser

11-12-2009, 03:14 AM	#18
mw09g37 Registered User Trader Score: (1) Join Date: Aug 2008 Posts: 341	fair enough. looks like it's between the Eibachs and the Tanabes. those pics of 2GoRNot2G's G are nice. did the NF210s have rear sag issues or is that just w/ the X models?... to the looks if it, it sounds like I'm going to go with the eibachs.. ha Last edited by mw09g37; 11-12-2009 at 03:30 AM.

11-12-2009, 06:11 AM	#19
BocaIvan Registered User 2009 Infiniti G37 Trader Score: (0) Join Date: Aug 2009 Location: Delray Beach, FL Posts: 156	I'm not sure send him a PM. What wheels do you have? __________________ 09 G37 PG \|Eibach Prokit\|Ichiba spacers\|GReddy SE\|Injen SRI\|VLEDS\|AutoKits-X diffuser

11-12-2009, 01:17 PM	#21
BocaIvan Registered User 2009 Infiniti G37 Trader Score: (0) Join Date: Aug 2009 Location: Delray Beach, FL Posts: 156	Cool, you should look into spacers. That way your wheels won't be tucked and they'll be flush with the fenders. __________________ 09 G37 PG \|Eibach Prokit\|Ichiba spacers\|GReddy SE\|Injen SRI\|VLEDS\|AutoKits-X diffuser

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-12-2009, 11:35 AM	#20
mw09g37 Registered User Trader Score: (1) Join Date: Aug 2008 Posts: 341	whichever setup I used will be going with the coupe 19s which plus wheels should be the same diameter as the 18s plus wheels.

11-14-2009, 09:48 PM	#22
mw09g37 Registered User Trader Score: (1) Join Date: Aug 2008 Posts: 341	cool I'll consider it, Alright I'm getting it done this week lets see how they turn out.