|
Next you will need to remove all the items from the light. start off putting one of the towels you got earlier on the floor so you can rest the light on something while you unscrew the items and you wont need to worry about scratching anything.
First you need to remove the large plastic braket on the lower half of the light. flip the light upside down so the bottom half is facing upwards. as you can see in PIC#1 the bracket is CIRCLED in YELLOW. you will need to remove the two phillip head screws that are CIRCLED in RED. Once you remove those screws the bracket will come right off.
Next you will need to remove the 3 phillip head screws CIRCLED in RED in PIC#2 from the HID ballast.
Next you need to remove the HID wire harness from the HID ballast. As you can see in PIC#3 the harness is CIRCLED in RED push down on the clip and pull outwards as indicated with the YELLOW ARROW.
Next as seen in PIC#4 remove the HID ballast CIRCLED in RED as indicated with the YELLOW ARROW.once you do this remove the small phillips head screw circled in blue. once you do this remove the brown harness clip CIRCLED in BROWN
Next as seen in PIC#5 remove the HID ballast CIRCLED in RED away as indicated with the YELLOW ARROW and DO NOT TOUCH THE SMALL SCREW WITH THE PINK X
|